国产又粗又猛又爽又黄的视频,波野吉多结衣在线观看,黑人荫道bbwbbb大荫道,偷窥50个美女撒尿高清

產品展示
首頁 > 產品展示 > 3240環氧板 > 云母板 > 環氧酚醛層壓玻璃布板

環氧酚醛層壓玻璃布板

描述:該產品是由電工無堿玻璃纖維布浸以環氧酚醛樹脂,經烘焙、熱壓加工而成

更新時間:2015-11-14
產品型號:3240
廠商性質:生產廠家
詳情介紹

 3240環氧酚醛層壓玻璃布板

 

產品說明

一、產品概述:(符合GB1303-77)

該產品是由電工無堿玻璃纖維布浸以環氧酚醛樹脂,經烘焙、熱壓加工而成。
該層壓板具有高的機械和介電性能,較好的耐熱性和耐潮性,并有良好的機械加工性,耐熱等級為B級。適用于電機、電器中作絕緣結構零部件,并可以潮濕環境和變壓器油中使用。

二、技術要求:
1、外觀:表面應平整光滑,不允許有氣泡雜質和其他明顯缺陷,允許有輕微擦傷。邊緣應切割整齊,端面不得不分層和裂紋。
2、寬度和長度大于450-980mm,允許公差±15mm。
3、標稱厚度和公差見表1。

表1 標稱厚度和公差 mm

標稱厚度 公差 標稱厚度 公差 標稱厚度 公差
0.2 0.3 ±0.07 5.0 5.5 ±0.48 21-30(相隔 1) ±1.50
0.5 0.8 ±0.14 6.0 6.5 ±0.58 32-40(相隔 2) ±2.00
1.0 1.2 1.5 ±0.22 7.0 8.0 ±0.68 42-50(相隔 2) ±2.20
1.8 2.0 ±0.28 9.0 10.0 ±0.80 52-60(相隔 2) ±2.50
2.5 3.0 3.5 ±0.33 11-15(相隔 1) ±1.00 65-80(相隔 5) ±2.80
4.0 4.5 ±0.38 16-20(相隔 1) ±1.30    

4、機械加工后不允許出現裂紋和掉渣。
5、翹度見表2

表2 翹度 mm

標稱厚度 翹度不高于
5.0-7.0 10
8.0-15 7
16-30 3

6、物理、機械和介電性能見表3

表3 物理、機械和介電性能

序號 指標名稱 單位 指標值
1 密度 g/cm3 1.70-1.90
2 馬丁溫度(縱向) ≥200
3
彎曲強度: 縱向
  橫向
Mpa ≥392
≥294
4
拉伸強度: 縱向
  橫向
Mpa ≥343
≥245
5 粘合強度 N ≥5684
6
抗沖擊強度: 縱向
  橫向
KJ/m2 ≥150
≥100
7
表面電阻系數: 常態時
  浸水后
≥1.0×107
≥1.0×105
8
體積電阻系數: 常態時
  浸水后
MΩ·m ≥1.0×105
≥1.0×103
9
平行層向絕緣電阻: 常態時
  浸水后
≥1.0×104
≥1.0×102
10 介質損耗角正切(頻率 50Hz)   ≤0.050
11
垂直層向介電強度,于溫度90℃±2℃的變壓器油中。
板厚0.5-1mm
板厚1.1-2mm
板厚2.1-3mm
板厚3mm以上
經一面加工者
MV/m

≥22.0
≥20.0
≥18.0
≥18.0
 
12 平行層向擊穿電壓,于溫度90℃±2℃的變壓器油中。 KV ≥30.0

三、產品貯存期:
從出廠之日起為十八個月。

3240 Epoxy-phenolic Glass Cloth Laminated Sheets(GB1303-77)

1、Products Summarize

The products are made of electrical alkali-free fiber cloth,impregnated with epoxy-phenolic resin,by processing under backing and heating.
3240 Epoxy-phenolic Glass Cloth Laminated Sheets have high mechanical,heat resistance and dielectric properties.it is suitable for insulation structure parts in motor and electric apparatus.and it is also used in transformer oil and humid environment.

2Technique Request
1. Appearance:surface should be neat and smooth,disallowing to have impurity and other obvious defect,allowing to have slight scoring,the edge should incised tidy,edge faces have no delamination and crack.
2. Width and length >450-980mm,allowed tolerance ±15mm
3. Nominal thickness and tolerance in chart 1

Chart 1 nominal thickness and tolerance mm be separated

Nominal Thickness Allowed Deviation Nominal Thickness Allowed Deviation Nominal Thickness Allowed Deviation
0.2 0.3 ±0.07 5.0 5.5 ±0.48 21-30Apart 1 ±1.50
0.5 0.8 ±0.14 6.0 6.5 ±0.58 32-40Apart 2 ±2.00
1.0 1.2 1.5 ±0.22 7.0 8.0 ±0.68 42-50Apart 2 ±2.20
1.8 2.0 ±0.28 9.0 10.0 ±0.80 52-60Apart 2 ±2.50
2.5 3.0 3.5 ±0.33 11-15Apart 1 ±1.00 65-80Apart 5 ±2.80
4.0 4.5 ±0.38 16-20Apart 1 ±1.30    

4. Disallowing crack and dregs falling after machining.
5. Setback in chart 2

Chart 2 Setback mm

Nominal Thickness Setback no higher than
5.0-7.0 10
8.0-15 7
16-30 3

6. Physics ,mechanical and dielectric properties in chart 3

Chart 3 physics ,mechanical and dielectric properties

S.N Item Name unit index Value
1 Density g/cm3 1.70-1.90
2 Martens Temperature(length wise direction) ≥200
3
Bending Strength length wise direction
  cross wise direction
Mpa ≥392
≥294
4
Tensile Strength length wise direction
  cross wise direction
Mpa ≥343
≥245
5 Bond Strength N ≥5684
6
Impact Resistant Strength length wise direction
  cross wise direction
KJ/m2 ≥150
≥100
7
Surface Resistance Normal
  Soaking
≥1.0×107
≥1.0×105
8
Volume Resistance Normal
  Soaking
MΩ·m ≥1.0×105
≥1.0×103
9
Parallel layer direction insulation Normal
  Soaking
≥1.0×104
≥1.0×102
10 Dissipation Factor 50HZ   ≤0.050
11
Uprightness layer direction dielectric strength
in 90±2℃ transformer oil
Sheets Thickness0.5-1mm
Sheets Thickness1.1-2mm
Sheets Thickness2.1-3mm
Sheets Thickness3mm以上
by way of one surface processed
MV/m

≥22.0
≥20.0
≥18.0
≥18.0
 
12 Parallel Withstand Voltage in 90±2℃ transformer oil KV ≥30.0

3、Storage period
18 months from leaving factory

 

 

 

 

 

留言框

  • 產品:

  • 您的單位:

  • 您的姓名:

  • 聯系電話:

  • 常用郵箱:

  • 省份:

  • 詳細地址:

  • 補充說明:

  • 驗證碼:

    請輸入計算結果(填寫阿拉伯?dāng)?shù)字),如:三加四=7
技術支持:化工儀器網   sitemap.xml   管理登陸
©2025 上海徐吉電氣有限公司(www.54shagua.com)版權所有   備案號:滬ICP備15015674號-62
CAOPORN国产精品免费视频| 艳鉧动漫1~6全集观看旧里| 少妇P毛又多水又大又黑| 男女吃奶做爰猛烈紧视频| 《亲爱的老师6在线播放》| 精品人妻码一区二区三区| 777午夜精品久久av蜜桃小说| 亚洲A∨无码无在线观看| 金瓶梅在线播放| 尤物yw午夜国产精品视频| 日本高清h色视频在线观看| 在线观看的资源视频| 日本护士野外奶水hd| gif动态图出处第一期| 冲田杏梨在线观看| 精品国产一区二区三区久久影院| 欧美xxxx做受欧美| 乡下熟妇xxxx妇色黄| 四川妇女bbbwbbbwm| 丰满岳乱妇在线观看中字无码 | 精品一线二线三线区别在哪| 青春草在线视频观看| 国产未成女一区二区三区| 我和虎狼之年的岳135章| 啊灬用力灬啊灬啊灬啊灬a片男男| 日本丰满熟妇XXXXXHD| 一个人看www在线视频| 放荡老师张开双腿任我玩| 偷玩朋友熟睡人妻| 噜妇插内射精品| 美女扒开尿眼让男人桶爽视频| 羞羞视频| 男人床上越折腾你是不是越爱你| 御书房双乳晃动干柴烈| 局长含了一整晚我的奶头| 中国极品少妇xxxxx| 奶水h人妻销魂共妻高h| 纯爱无遮挡h肉动漫在线播放| 中国xxxx真实偷拍| chinese国产avvideoxxxx实拍 | 1—36集电视剧免费观看36集|